Marine Electronics

It was seven-ish and I was sitting in a pleasant-enough room overlooking the front entrance to the pub above which I had just moved in. The pub was the Pig and Whistle on Soi 7 in Pattaya. Across the lane was a large hole, which they were hoping to build a hotel in and next door to that, just opposite me, was a tiny bar with one woman sitting on a stool outside it. Not that there was a wall there, it was open on two sides. The Soi was nice and peaceful, I thought. I also thought that I might go and sit in that little bar and talk to that woman, if my friend was late, because I would surely see him arrive from two metres away, the width of the Soi.

So, I went to the bar in the pub at 19:15 to await my friend who said he would arrive at 20:00. It was much busier than thirty minutes earlier but not noisy and I sat at the bar. The first thing a barmaid did was say hello, give me a menu and step back. I did not really want to eat, I only wanted a beer as I assumed we would be eating together later, but I wanted to read the menu anyway.

'A pint of Boddington's', I said. It arrived and the girl began laying a setting for me. I tried to explain that I was not hungry, but it was no good. Like in Spain, most people eat and drink at the same time. All the while the girl was smiling at me. Then she said: 'You live upstairs? My name Charli. What you want to eat?'. So, I gave in and ordered something and rice.

'You first time in Thailand? You no can eat. Too spicy', she said with a smile. 'Oh', I replied, 'but I want to try. 'I put only 50-50 for you', she declared and went.

I struggled through that meal and it took a Boddingtons and a bottle of water. Charli had been right, it was too hot for first-time foreigners and she had reduced the chilis by 50%. I have always listened to a Thai's guidance on food ever since.

I moved to by the window to see what was happening as it was dark by 19:30 and I was curious. Within thirty minutes Soi 7 had changed completely. I could see hundreds of girls and tourists milling about. I wanted to go out and join in or at least sit in the quiet bar across the way, but I'm ashamed to say that I was too frightened, so I sat put, rivetted to the Pig like a rabbit in a hunter's beam.

My friend arrived on time and after we had been chatting for an hour, he said: 'Drink up, I have someone I want you to meet'. This was it, we were going into that mele. A waitress held the door for us and the noise and the heat were tremendous. Especially the noise. Every metre at least two or three girls would yell: 'Hello, sexy man, you want a drink'. Trying to say no courteously to each call was impractical, so I just stuck close to my pal.

Luckily, we only had about fifty metres to stroll and we sat down in another bar. My friend said hello to several ladies and then said, this a girl I have been going out with for some time. I was astounded as I had never heard him talk about her, ever. She was gorgeous, but could not speak English, so I sat in the din in silence. Not for long through, as my friend said, I have a blind date for you and he introduced another girl to me who was equally beautiful, but with whom I could speak a little. She was captivating and I was captivated. The pandemonium seemed to pass away, but it was only because I was concentrating on my new friend. The four of us had the best time and the best food I had ever had in my forty-nine years of existence.

If you want to know how to get a UK visa, please go over to our website now at How to Get a UK Visa

You doubtless already know the best way to keep your plants growing well in your garden. However, in order to keep your vegetables and garden plants growing well, you do require good quality soil, sunlight and adequate water. Although these are supplied by nature, you also need modern gardening tools to maintain your garden in good form. Gardening tools are a great help in taking care of your plants and providing the right growing conditions that have such a constructive effect on your plants' health.

Inadequate gardening tools can also cause damage to your plants. In order to minimize this risk, you ought to use the best gardening tools you can afford. Frequently, when people talk about the 'best gardening tools', they really mean gardening tools that allow energy efficiency.

Here are a few of the best gardening tools available on the market. They will provide better care than ever for your flowers and your garden.

Lawnmowers: The Luxus Push Reel Mower was voted the best lawnmower by gardening aficionados. It has a large top cover to protect overhanging fruit, flowers and shrubs. Another extraordinary gardening tool is the American Lawn Mower Deluxe. It has also been recognized as one of the best. It is hand operated, therefore emitting no greenhouse gasses, but it is not useful on very long grass.

Garden Shredders In general, all garden shredders have a high power motor and a near-silent crushing system. This sort of gardening tool is employed to speed up shredding garden waste. Garden shredders can be electric or gas powered. The electric shredders are easy to assemble. They assist in disposing of tree and hedge prunings up to a maximum of 40 mm in diameter. This gardening tool is considered to be among the most useful by gardeners. They are obtainable with fixed wheels for added manoeuvrability.

Cultivators These modern gardening tools are obtainable with patented tines to help in cutting into firm, compacted earth without difficulty. Several cultivators are available with a free border trimmer. The cultivator is ideal for clearing moss and aerating earth. This garden tool is especially useful for turning over vegetable plots, flowerbeds, etc..

Leaf sweeper These gardening tools are extensively employed for removing large numbers of leaves from smaller lawns. They often include a very large 200-liter collector.

Hedge Trimmer This gardening tool has also been voted as important equipment by gardening enthusiasts. It is used for trimming hedges and pruning plants.

Garden Fork This is a fantastic gardening tool employed for aerating and transplanting. You can also use this gardening tool to split grasses and perennials. Furthermore, the spading fork is valuable for working compost, mulch and sorting hay in smaller gardens.

Mattock The mattock is an important gardening tool for splitting up clay soils and working around older trees with big roots. A mattock can be employed as a substitute for a pick and a hoe in your garden.

So, if you are new to gardening or you want to buy a gardening enthusiast a useful gift, check out what they already have and pick something from this list.

Owen Jones, the author of this article writes on several subjects, but is currently involved with Black and Decker Tools. If you would like to know more or check out some great offers, please go to our website at Woodworking Power Tools

categories: carpentry,woodwork,tools,apprenticeships,family,careers,social issues,history,genealogy,small business,sociology,Wales,UK,other

I first came to Thailand in 2004 and I arrived here more of less by accident. I had travelled a lot in Europe: Russia, Western Europe, Scandinavia, North Africa and north South America, but I had never found the time to travel to Asia.

One night, I was talking to a friend who had travelled extensively throughout the world and he was telling me about his favourite country, to where he had been returning year after year for fourteen years. Knowing my friend's experience as a traveller, I was very surprised to hear that he had been choosing to go to the same place in Asia for fourteen years.

I had to ask him which part of huge Asia held such an attraction for him and he said Thailand. I knew practically nothing about Thailand, except that I had had a few meals at a near-by Thai restaurant over the years. I also knew from collecting stamps as a boy that it used to be called Siam. Anyway, my friend asked me if I'd like to go. I said that I would 'one day' and meant it.

He surprised me by saying that he was going for a month soon and that I was welcome to go with him. I answered that I had a few jazz festivals to go to soon and maybe I would, if there was at least a month between them and if I could get a flight and if... I could hear myself putting him off, but I did not know why.

A number of hours later, I went home and being a keen Internet surfer, I checked out a bit about Thailand on the travel brochure sites. It looked really fantastic. The prices were good too except for the flights. Hotels were cheap to reasonable and food and drinks prices were insignificant compared to where I lived. So, I checked the dates of the two Jazz festivals and they were thirty-three days apart. Now for the flight. I spent well into the next morning checking flights and found one for the day after the first festival leaving from our local airport. It was not the cheapest flight, but it gave me more time.

In a reckless moment I booked it there and then online. I then found an inn with rooms to let online that my friend had said he went to on quiz evenings and guessed that they would be open by now serving breakfasts. I sent them an email and a response came back twenty minutes later. I had been lucky again. The boss was in the middle of checking yesterday's figures, when he saw my email come through. However, not sure of his Internet ability, he asked me to phone him right away. I checked my watch, it was still 4AM so I phoned.

He took my booking on trust and so I did not have to make a payment. I had heard about Thailand, made up my mind to go and booked the flight and room all within five hours and I could not wait for nine o'clock to come to inform my friend that I would be going too.

If you want to know how to get a UK visa, please go over to our website now at How to Get a UK Visa

My family has had carpenters in it for at least four generations and I can not go back any farther than that. My father's father came from Anglesey, an island off north Wales called Ynys Mon in Welsh. I visited his place of birth once. We were directed by a local old-timer to a meadow, but we could not see a house or any ruins. I scrambled up unto a mound of earth to get a better view and then we realized that I was standing on his old home.

He had lived in a hole in the ground covered over with earth! A door was still on it, overgrown after 70 years or so of disuse and there was a kind of stone chimney in the long grass on the top. I was 10 years old and my Dad was 33 and it was the only time either of us went the length of Wales to look up our family history. It is more than probable that my great-grandfather was a shepherd.

My grandfather ran away from home at-- years of age to Liverpool and became an apprentice ship's carpenter. That would have been in'14. What a time to choose to go out into the big world - the start of the First World War in Europe. He could not speak English at the time, but must have taught himself as he learned his apprenticeship.

He passed out as the best in his year and was given a set of the finest woodworking tools of the age. Each tool had a small brass plate in the handle with his name etched onto it. My father still treasured them when I was growing up.

I never met my granndfather; he died a month before I was born, but I was named after him and, knowing that I was due and that he was going, he left me a teething ring, which I still have. More to the point of this article though, there was not a single power tool in his tool bag when he died in'54.

My father was the youngest son and when he was old enough, he had to leave school to be apprentice to his father who had stopped his roaming by then. Growing up with my father in the'50's and'60's, I do not remember him using power tools either. He used a brace-and-bit for drilling, several assorted hand-sharpened saws for cutting and his only acquiescence to modern technology, a Yankee, which was a pump-action screwdriver. Everything he needed to hang a door or cut a roof was in one bag or later on a box, which he made himself.

I went away to study and travel and when I returned for good 12 years later, my brother had finished his carpenter's apprenticeship and was working for my Dad. That would have been in about'80 and my brother still vows to ths day that Dad only bought power tools then because he, my brother, had learned how use them in technical college. Something which my father always denied, although it did seem a bit of a coincidence to me. My brother, now in his Fifties, still uses hand tools where he can, but also has the full range of power tools in a near-by van.

His son, now nearly 30 is also a carpenter and he has a power tool for every job and throw-away saws. How times have changed.

Owen Jones, the author of this article writes on several subjects, but is currently involved with Black and Decker Power Tools. If you would like to know more or check out some great offers, please go to our website at Woodworking Power Tools

Have you ever had to deal with a stubborn screw that just would not go into the material as easily as you wanted? How about one that would not come out for you either? This is annoying as well as time wasting. Electric screwdrivers are a great resolution for these problems. They are very effective and inexpensive.

In line electric screwdrivers are intended for basic household projects. They are not very powerful, but more than adequate to get the job done. For heavy duty work, consider using a drywall screwdriver. Some models offer a range of speeds. There are a number of models to select from. Some are very similar in design to a basic screwdriver. Other are shaped like the number seven, with a handle for you to guide the screws in. Others come with a handle that pivots to help you to get into just about any angle you can come across.

Choose a power screwdriver that fits well in your hand. Some of the handles are coarse and others have a soft, foam grip on them. Hold the power screwdriver in your hand and see how it feels after a few minutes. If you will be using it for lengths of time then comfort is very important. You don't want to finish up with sore hands or blisters.

Different electric screwdrivers have different amounts of torque electric and speeds. You will want to compare this information before deciding on the electric screwdriver you wish to purchase. Take some time to appraise what each power screwdriver is recommended for. Compare that with the work you are liable to undertake with the electric screwdriver.

It is a good idea to maintain your power screwdriver fully charged. This will give you the best possible results from it. If the battery doesn't hold a charge for very long, you will to swap the battery. Some people choose to buy a second battery from the start so that they can have one charging and one in the power screwdriver. This is highly recommended if you are going to be using the power screwdriver on a regular basis.

For those of you who mean to use your power screwdriver often, consider buying a power screwdriver kit. It comes with a sturdy carrying case. Inside you will find the power screwdriver and a slit for each accessory. You will normally get many sizes of bits to use. It will also include a power cord. Some of the power screwdriver kits also include an extra battery as well as a charger that plugs into your cigarette lighter. You can get a electric screwdriver kit at a much better price than having to purchase accessories individually.

Very few accidents actually occur from using a electric screwdriver, but they can. When using a electric screwdriver, remember the driving force behind it. Both of your hands should be away from the part that turns. The turning blade can slice your hand if you aren't careful. It is a safe idea to use eye protection as well.

Electric screwdrivers will drive through almost everything. It is very important that you make sure there are no electric cords or wires behind the spot where you are screwing. Keep your hair pulled away from your face as well. Leaning forward to establish your progress can result in loose hair getting caught and twisted on the blade.

Owen Jones, the author of this article writes on several subjects, but is currently involved with Jet Power Tools. If you would like to know more or check out some great offers, please go to our website at Woodworking Power Tools